Zinc-rich Measured and Indicated Mineral Resources increased to 11.8 million tonnes at 35.34% zinc, containing 9.2 billion pounds of zinc, 8.7 million ounces of silver and 24.4 million ounces of germanium
In addition, copper-rich Measured and Indicated Mineral Resources increased to 2.3 million tonnes at 4.03% copper, containing 204 million pounds of copper, 1.6 million ounces silver and 1.4 million ounces germanium
Southern Zinc now confirmed as significant new, high-value, poly-metallic zone
New resource estimate to be incorporated into the pending Definitive Feasibility Study
KIPUSHI, Democratic Republic of Congo, July 30, 2018 (GLOBE NEWSWIRE) -- Robert Friedland, Executive Chairman of Ivanhoe Mines (TSX: IVN; OTCQX: IVPAF), and Lars-Eric Johansson, Chief Executive Officer, announced today that an independently prepared estimate has resulted in a significant increase in Measured and Indicated Mineral Resources at the company’s high-grade, Kipushi zinc-copper-silver-germanium mine.
The new Mineral Resource estimate is the first update to be issued for Kipushi since Ivanhoe Mines published its initial, independent NI 43-101 estimate in January 2016.
The new Mineral Resource estimate has increased Kipushi’s Measured and Indicated zinc-rich resources by 16%, from 10.2 million tonnes to 11.8 million tonnes, with an increase in zinc grade from 34.89% to 35.34%. In addition, the mine’s Measured and Indicated copper-rich resources have increased by 40% from 1.6 million tonnes to 2.3 million tonnes, with a slight increase in the copper grade from 4.01% to 4.03%.
Highlights of this updated estimate, prepared by the MSA Group, of Johannesburg, South Africa, in compliance with CIM definition standards, are:
- Measured and Indicated Mineral Resources, primarily in the Big Zinc Zone, have increased to 11.78 million tonnes at grades of 35.34% zinc, 0.80% copper, 23 grams per tonne (g/t) silver and 64 g/t germanium, at a 7% zinc cut-off – containing an estimated 9.2 billion pounds of zinc.
- The zinc grade of Kipushi’s Measured and Indicated Mineral Resources is more than twice as high as the world’s next-highest-grade zinc project, independently ranked by Wood Mackenzie, an international industry research and consulting group, based on contained zinc (Figure 1).
- Zinc-rich Inferred Mineral Resources total an additional 1.14 million tonnes at grades of 33.77% zinc, 1.24% copper, 12 g/t silver and 62 g/t germanium. The Inferred Mineral Resources are contained partly in the Big Zinc Zone and partly in the Southern Zinc Zone.
- Kipushi’s copper-rich Measured and Indicated Mineral Resources contained in the adjacent Fault Zone, Fault Zone Splay and Série Récurrente Zone total an additional 2.29 million tonnes at grades of 4.03% copper, 2.85% zinc, 21 g/t silver and 19 g/t germanium, at a 1.5% copper cut-off – containing 144 million pounds of copper. Copper-rich Inferred Mineral Resources in these zones total an additional 0.44 million tonnes at grades of 3.89% copper, 10.77% zinc, 19 g/t silver and 55 g/t germanium.
- Ivanhoe’s 2017 drilling program has demonstrated that zinc and copper mineralization of the Kipushi system remain open laterally and at depth.
The new Mineral Resource estimate incorporates Ivanhoe’s second phase of underground drilling at Kipushi that was completed late last year, with a total of 9,706 metres drilled in 58 holes. Eight holes were drilled for metallurgy, 31 holes in the Southern Zinc and Big Zinc, five holes in the Nord Riche and 14 holes in the Série Récurrente. The updated Mineral Resource will be used in the preparation of the Kipushi Definitive Feasibility Study (DFS), which is expected to be finalized later this year or early in 2019.
The DFS will update and refine the findings of the Preliminary Feasibility Study (PFS) issued last December. Similar to the PFS, the DFS will focus on the initial mining of Kipushi’s Big Zinc Zone. The planned return to production would establish Kipushi as the world’s highest-grade, major zinc mine.
Infill drilling establishes Southern Zinc as high-value, poly-metallic zone
Infill and confirmation drilling in the Southern Zinc Zone has confirmed the high tenor of this mineralized zone (tenor is the percentage of minerals that is actual metal to be extracted), which is characterized by high zinc, copper, lead and silver grades. The poly-metallic style of mineralization in the Southern Zinc is very similar to historical Kipushi production, with a clear zonation of copper-rich to zinc-rich zones. Using a zinc cut-off of 7%, the Southern Zinc Zone contains 0.88 million tonnes of Indicated Mineral resources at a grade of 24.5% zinc, 2.97% copper, 1.95% lead and 75 g/t silver. Additional Inferred Mineral resources in this zone are 0.16 million tonnes at a grade of 24.37% zinc, 1.64% copper, 1.2% lead and 38 g/t silver.
Mr. Friedland said that the new resource estimate is very positive for mine planning purposes, adding another 1.6 million tonnes of Measured and Indicated zinc-rich resources and, at the same time, improving the overall zinc grade of the resources.
“We have always believed that Kipushi held the potential to host significantly more high-grade zinc, copper, silver and germanium resources than were initially reported in the mineral inventory when we acquired our 68% interest in the mine in 2011,” Mr. Friedland said.
“Kipushi operated for more than 60 years as a high-grade copper mine, with significant germanium production, before it was placed on care-and-maintenance in the 1990s. With continued exploration success, we are confident Kipushi could remain in production for at least several more decades.
“While our initial mine plan focuses on mining Kipushi’s exceptionally high-grade Big Zinc Deposit, the adjacent Fault Splay and Southern Zinc zones are compelling, near-term development targets as they have thick, zinc-rich mineralization zones grading up to 45% zinc. In addition, the copper-rich zones offer further opportunities to expand and diversify the mine plan once production recommences,” Mr. Friedland added.
Given the significant, very-high-grade zinc resource at Kipushi – which is rich in potential by-product credits including copper, silver and germanium – and the ongoing exploration campaign at Kipushi, Ivanhoe and the Gécamines technical team are continuing to investigate additional downstream processing options.
Germanium is a strategic metal that is a key component of fibre-optic systems, infrared optics, high-efficiency solar cell applications and light-emitting diodes. The current spot price of germanium is approximately US$1,900 a kilogram (US$54 an ounce).
New estimate enhances the Mineral Resources available for Kipushi’s Definitive Feasibility Study
The new Mineral Resource estimate was prepared in accordance with the 2014 CIM definition standards, incorporated by reference into Canadian National Instrument 43-101 – Standards of Disclosure for Mineral Projects.
The new estimate was based on the results of the 58 new drill holes completed at Kipushi by Ivanhoe Mines in 2017, 84 drill holes completed by Ivanhoe Mines prior to 2016 and an additional 107 historical holes drilled by Gécamines. Mineral Resource estimates were completed below the 1,150-metre-level on the Big Zinc Zone, Southern Zinc Zone, Fault Zone, Fault Zone Splay and Série Récurrente Zone. The Mineral Resources were categorized either as zinc-rich resources or copper-rich resources, depending on the most abundant metal. The Big Zinc and Southern Zinc zones have been tabulated using zinc cut-offs and are shown in Table 1; the Fault Zone, the Fault Zone Splay and Série Récurrente Zone have been tabulated using copper cut-offs and are shown in Table 2.
For the zinc-rich zones, the Mineral Resource is reported at a base-case cut-off grade of 7.0% zinc and the copper-rich zones at a base-case cut-off grade of 1.5% copper. Given the considerable revenue that could be obtained from the additional metals in each zone, MSA considers that mineralization at these cut-off grades will satisfy reasonable prospects for economic extraction.
The Kipushi Mine is adjacent to the town of Kipushi, approximately 30 kilometres southwest of Lubumbashi and less than one kilometre from the Zambian border. The Kipushi Mine is operated by Kipushi Corporation (KICO), a joint venture between Ivanhoe Mines (68%) and Gécamines (32%), the DRC’s state-owned mining company.
MOU signed with underground mining contractor Byrnecut
In December 2017, KICO signed a memorandum of understanding (MOU) with Byrnecut Offshore Proprietary Limited (Byrnecut), of Perth, Australia. The MOU relates to the potential engagement of Byrnecut to provide underground mining services at Kipushi, including cost estimation, contractor management, operational readiness and operational services.
The planned primary mining method for the Big Zinc Deposit in the PFS is sublevel long-hole, open stoping, with cemented backfill. The crown pillars are expected to be mined once adjacent stopes are backfilled using a pillar-retreat mining method. The Big Zinc Deposit is expected to be accessed via the existing decline and without any significant new development. The main levels are planned to be at 60-metre vertical intervals, with sublevels at 30-metre intervals.
A PDF accompanying this announcement is available at http://resource.globenewswire.com/Resource/Download/36ced71c-7537-4da2-9ac3-b82b5ac3f159
Table 1. Kipushi zinc-rich Mineral Resource at 7% zinc cut-off grade,
effective date of June 14, 2018.
| Zone | Category | Tonnes | Zn | Cu | Pb | Ag | Co | Ge |
| (Millions) | % | % | % | g/t | ppm | g/t | ||
| Big Zinc | Measured | 3.65 | 39.87 | 0.65 | 0.35 | 18 | 18 | 56 |
| Indicated | 7.25 | 34.36 | 0.62 | 1.29 | 19 | 12 | 53 | |
| Inferred | 0.98 | 35.32 | 1.18 | 0.09 | 8 | 15 | 62 | |
| Southern Zinc Zone | Indicated | 0.88 | 24.52 | 2.97 | 1.95 | 75 | 6 | 188 |
| Inferred | 0.16 | 24.37 | 1.64 | 1.20 | 38 | 6 | 61 | |
| Total | Measured | 3.65 | 39.87 | 0.65 | 0.35 | 18 | 18 | 56 |
| Indicated | 8.13 | 33.30 | 0.87 | 1.36 | 25 | 11 | 68 | |
| Measured & Indicated | 11.78 | 35.34 | 0.80 | 1.05 | 23 | 13 | 64 | |
| Inferred | 1.14 | 33.77 | 1.24 | 0.24 | 12 | 14 | 62 | |
| Contained Metal Quantities | ||||||||
| Zone | Category | Tonnes | Zn Pounds | Cu Pounds | Pb Pounds | Ag Ounces | Co Pounds | Ge Ounces |
| (Millions) | (Millions) | (Millions) | (Millions) | (Millions) | (Millions) | (Millions) | ||
| Big Zinc | Measured | 3.65 | 3210.6 | 52.3 | 27.8 | 2.06 | 0.14 | 6.60 |
| Indicated | 7.25 | 5489.0 | 98.7 | 206.6 | 4.48 | 0.19 | 12.43 | |
| Inferred | 0.98 | 764.0 | 25.5 | 1.9 | 0.26 | 0.03 | 1.96 | |
| Southern Zinc Zone | Indicated | 0.88 | 476.5 | 57.6 | 37.8 | 2.11 | 0.01 | 5.34 |
| Inferred | 0.16 | 86.7 | 5.8 | 4.3 | 0.20 | 0.00 | 0.32 | |
| Total | Measured | 3.65 | 3210.6 | 52.3 | 27.8 | 2.06 | 0.14 | 6.60 |
| Indicated | 8.13 | 5965.5 | 156.4 | 244.4 | 6.59 | 0.20 | 17.77 | |
| Measured & Indicated | 11.78 | 9176.0 | 208.6 | 272.2 | 8.65 | 0.34 | 24.36 | |
| Inferred | 1.14 | 850.7 | 31.3 | 6.2 | 0.46 | 0.04 | 2.28 | |
Notes:
- All tabulated data has been rounded and as a result minor computational errors may occur.
- Mineral Resources which are not Mineral Reserves have no demonstrated economic viability.
- The Mineral Resource is reported as the total in-situ Mineral Resource.
- Metal quantities are reported in multiples of Troy Ounces or Avoirdupois Pounds.
- The cut-off grade calculation was based on the following assumptions: zinc price of US$1.0/lb, mining cost of US$50/tonne, processing cost of US$10/tonne, G&A and holding cost of US$10/tonne, transport of 55% zinc concentrate at US$210/tonne, 90% zinc recovery and 85% payable zinc.
Table 2. Kipushi copper-rich Mineral Resource at 1.5% copper cut-off grade,
effective date of June 14, 2018.
| Zone | Category | Tonnes | Cu | Zn | Pb | Ag | Co | Ge |
| (Millions) | % | % | % | g/t | ppm | g/t | ||
| Fault Zone | Measured | 0.14 | 2.74 | 1.52 | 0.04 | 16 | 77 | 21 |
| Indicated | 1.22 | 4.11 | 3.32 | 0.09 | 21 | 96 | 30 | |
| Inferred | 0.20 | 3.11 | 2.58 | 0.07 | 18 | 43 | 23 | |
| Série Récurrenté | Indicated | 0.93 | 4.14 | 2.43 | 0.02 | 23 | 50 | 4 |
| Inferred | 0.03 | 1.81 | 0.06 | 0.00 | 8 | 52 | 0.3 | |
| Offset Zone | Inferred | 0.21 | 4.91 | 19.84 | 0.01 | 21 | 107 | 93 |
| Total | Measured | 0.14 | 2.74 | 1.52 | 0.04 | 16 | 77 | 21 |
| Indicated | 2.15 | 4.12 | 2.94 | 0.06 | 22 | 76 | 19 | |
| Measured & Indicated | 2.29 | 4.03 | 2.85 | 0.06 | 21 | 76 | 19 | |
| Inferred | 0.44 | 3.89 | 10.77 | 0.04 | 19 | 75 | 55 | |
| Contained Metal Quantities | ||||||||
| Zone | Category | Tonnes | Cu Pounds | Zn Pounds | Pb Pounds | Ag Ounces | Co Pounds | Ge Ounces |
| (Millions) | (Millions) | (Millions) | (Millions) | (Millions) | (Millions) | (Millions) | ||
| Fault Zone | Measured | 0.14 | 8.5 | 4.7 | 0.1 | 0.07 | 0.02 | 0.09 |
| Indicated | 1.22 | 110.8 | 89.7 | 2.5 | 0.82 | 0.26 | 1.19 | |
| Inferred | 0.20 | 13.4 | 11.1 | 0.3 | 0.12 | 0.02 | 0.14 | |
| Série Récurrenté | Indicated | 0.93 | 84.6 | 49.8 | 0.5 | 0.69 | 0.10 | 0.12 |
| Inferred | 0.03 | 1.3 | 0.04 | 0.0 | 0.01 | 0.00 | 0.00 | |
| Offset Zone | Inferred | 0.21 | 23.2 | 93.7 | 0.1 | 0.14 | 0.05 | 0.64 |
| Total | Measured | 0.14 | 8.5 | 4.7 | 0.1 | 0.07 | 0.02 | 0.09 |
| Indicated | 2.15 | 195.4 | 139.4 | 3.0 | 1.51 | 0.36 | 1.31 | |
| Measured & Indicated | 2.29 | 204.0 | 144.2 | 3.1 | 1.58 | 0.39 | 1.40 | |
| Inferred | 0.44 | 37.9 | 104.9 | 0.4 | 0.27 | 0.07 | 0.78 | |
Notes:
- All tabulated data has been rounded and as a result minor computational errors may occur.
- Mineral Resources which are not Mineral Reserves have no demonstrated economic viability.
- The Mineral Resource is reported as the total in-situ Mineral Resource.
- Metal quantities are reported in multiples of Troy Ounces or Avoirdupois Pounds.
- The cut-off grade calculation was based on the following assumptions: copper price of US$3.0/lb, mining cost of US$50/tonne, processing cost of US$10/tonne, G&A and holding cost of US$10/tonne, 80% copper recovery and 96% payable copper.
Qualified Person, Quality Control and Assurance
The Mineral Resource estimate has been completed by Mr. J.C. Witley (BSc Hons, MSc (Eng.)) who is a geologist with 30 years’ experience in base and precious metals exploration and mining as well as Mineral Resource evaluation and reporting. He is a Principal Resource Consultant for The MSA Group (an independent consulting company), is a member in good standing with the South African Council for Natural Scientific Professions (SACNASP) and is a Fellow of the Geological Society of South Africa (GSSA). Mr. Witley has the appropriate relevant qualifications and experience to be considered a “Qualified Person” for the style and type of mineralization and activity being undertaken as defined in National Instrument 43-101 Standards of Disclosure of Mineral Projects.
The scientific and technical information in this news release has been reviewed and approved by Stephen Torr, P.Geo., Ivanhoe Mines’ Vice President, Project Geology and Evaluation, a Qualified Person under the terms of National Instrument 43-101. Mr. Torr has verified the technical data disclosed in this news release.
Ivanhoe Mines maintains a comprehensive chain of custody and QA-QC program on assays from its Kipushi Project. Half-sawn core was processed either at its preparation laboratory in Kamoa, DRC, or its exploration preparation laboratory in Kolwezi, DRC. Prepared samples then are shipped to Bureau Veritas Minerals (BVM) Laboratories in Australia for external assay. Industry-standard certified reference materials and blanks are inserted into the sample stream prior to dispatch to BVM. Ivanhoe Mines’ QA-QC program has been set up in consultation with MSA Group (Pty.) Ltd., of Johannesburg.
About Ivanhoe Mines
Ivanhoe Mines is advancing its three principal projects in Southern Africa: 1) Mine development at the Platreef platinum-palladium-nickel-copper-gold discovery on the Northern Limb of South Africa’s Bushveld Complex; 2) mine development and exploration at the tier-one Kamoa-Kakula copper discovery on the Central African Copperbelt in the Democratic Republic of Congo; and 3) upgrading at the historic, high-grade Kipushi zinc-copper-silver-germanium mine, also on the DRC’s Copperbelt. For details, visit www.ivanhoemines.com.
Information contacts
Investors
Bill Trenaman +1.604.331.9834
Media
North America: Bob Williamson +1.604.512.4856
South Africa: Jeremy Michaels +27.82.772.1122
Cautionary statement on forward-looking information
Certain statements in this news release constitute “forward-looking statements” or “forward-looking information” within the meaning of applicable securities laws. Such statements and information involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company, its projects, or industry results, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements or information. Such statements can be identified by the use of words such as “may”, “would”, “could”, “will”, “intend”, “expect”, “believe”, “plan”, “anticipate”, “estimate”, “scheduled”, “forecast”, “predict” and other similar terminology, or state that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved.
Such statements include without limitation statements that the updated Mineral Resource will be used in the preparation of the Kipushi Definitive Feasibility Study, which is expected to be finalized later this year or early in 2019, and statements regarding mine planning and operations.
Readers are cautioned not to place undue reliance on forward-looking information or statements.
Forward-looking statements and information involve significant risks and uncertainties, should not be read as guarantees of future performance or results and will not necessarily be accurate indicators of whether or not such results will be achieved. A number of factors could cause actual results to differ materially from the results discussed in the forward-looking statements or information, including, but not limited to, the factors discussed under “Risk Factors” and elsewhere in the company’s MD&A, as well as the inability to obtain regulatory approvals in a timely manner; the potential for unknown or unexpected events to cause contractual conditions to not be satisfied; unexpected changes in laws, rules or regulations, or their enforcement by applicable authorities; the failure of parties to contracts with the company to perform as agreed; social or labour unrest; changes in commodity prices; and the failure of exploration programs or studies to deliver anticipated results or results that would justify and support continued exploration, studies, development or operations.
This news release also contains references to estimates of Mineral Resources. The estimation of Mineral Resources is inherently uncertain and involves subjective judgments about many relevant factors. Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability. The accuracy of any such estimates is a function of the quantity and quality of available data, and of the assumptions made and judgments used in engineering and geological interpretation, which may prove to be unreliable and depend, to a certain extent, upon the analysis of drilling results and statistical inferences that may ultimately prove to be inaccurate. Mineral Resource estimates may have to be re-estimated based on, among other things: (i) fluctuations in zinc, copper, germanium, silver or other mineral prices; (ii) results of drilling; (iii) results of metallurgical testing and other studies; (iv) changes to proposed mining operations, including dilution; (v) the evaluation of mine plans subsequent to the date of any estimates; and (vi) the possible failure to receive required permits, approvals and licences.
Although the forward-looking statements contained in this news release are based upon what management of the company believes are reasonable assumptions, the company cannot assure investors that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release and are expressly qualified in their entirety by this cautionary statement. Subject to applicable securities laws, the company does not assume any obligation to update or revise the forward-looking statements contained herein to reflect events or circumstances occurring after the date of this news release.
The company’s actual results could differ materially from those anticipated in these forward-looking statements as a result of the factors set forth in the “Risk Factors” section and elsewhere in the company’s MD&A for the year ended December 31, 2017 and its Annual Information Form.
