TRELLEBORG, Sweden, Oct. 9, 2012 (GLOBE NEWSWIRE) -- To support its customers in proving seals for critical applications, Trelleborg Sealing Solutions has invested in the world's most powerful test bench for hydraulic rod seals. This unique facility allows testing to be carried out that has previously never been possible, providing an unrivaled resource to seal specifiers globally.
Installed in a specially constructed well, the 18-ton, 260 kW floating-mount rod seal test bench is located at Trelleborg's research and development center in Stuttgart, Germany. It is capable of simulating, as realistically as possible, the patterns of movements and stresses faced by hydraulic rod seals in some of the most demanding rod seal applications, such as aircraft landing gear, injection molding machines and mining excavators.
"Our seals are used all over the world and must be able to operate equally effectively in the cold of the Antarctic as in the heat of the Sahara Desert," says Holger Jordan, Manager of Fluid Power Technology. "Our substantial investment in this test rig allows us to offer our customers a unique facility to prove seals against ever-increasing development requirements."
"The test bench is about simulating the real world as closely as possible in the laboratory," says Eric Seeling, the engineer responsible for its design. "The rig can perform long-term endurance and development tests, reproducing the effect on hydraulic rod seals of, for example, 25,000 landings of an aircraft or a million upstrokes on a press. In particular, it excels in aerospace applications where it can check parameters such as braking or lateral forces on landing gear and even simulate life-like knocking caused by uneven runways; what might be called a bumpy landing."
A resource for the Trelleborg Sealing Solutions international R&D network, over 35 years of testing experience went into the design of the test bench. The entire bench was installed in a concrete well so that vibrations can be isolated from the surrounding building. The drive unit was set up in a separate room so that energy otherwise lost through emissions can be used in an environmentally friendly manner to reheat the building.
The test bench is suitable for seals from 4 to 16 inches in diameter and can test a complete sealing configuration in a single test construction, replicating the pressure between the primary and secondary seals realistically. Travelling at speeds of up to 3.3 feet per second or frequencies up to 10 Hz, it can generate movements and pressure patterns in sinus waves, trapezoidal forms and even freely modeled patterns.
One of the test bench's more novel features is a lateral force cylinder mounted at the bottom of the bench. Capable of exerting forces of up to 225 kN, it can place permanent radial loads on the seals, or, depending on the stroke, exert dynamic loads. Another special feature is the ability to simulate different atmospheric temperatures between -76°F and +194°F. Results can be fully documented, allowing customers to provide their clients with proof of performance related to prescribed parameters.
ENDS
For more information or high resolution images, please contact:
Julie Eck, Marketing Communications Manager, Trelleborg Sealing Solutions Americas, 1-260-748-5752, Julie.Eck@trelleborg.com
For press information: Faith Van Gilder, Asher Agency, 535 W. Wayne St., Fort Wayne, IN 46802. 1-260-424-3373. Email faithv@asheragency.com.
For press releases from the whole of Trelleborg Group, visit the Trelleborg Media Center. The Products and Solutions section allows you to select news by industry. Go to www.trelleborg.com/news where you can also subscribe to our newsletter.
Information about Trelleborg Sealing Solutions and Trelleborg Group
Trelleborg Sealing Solutions is one of the world's leading developers, manufacturers and suppliers of precision seals. It supports its aerospace, industrial and automotive customers through over 20 production facilities and more than 40 marketing companies globally. Within its portfolio are some of the longest established sealing brands, including Busak+Shamban, Chase Walton, Dowty, Forsheda, GNL, Palmer Chenard, Shamban, Skega and Stefa along with a large number of proprietary products and materials such as Turcon Ò , Zurcon Ò , Orkot Ò , Isolast Ò , Stepseal Ò and Wills Rings Ò. www.tss.trelleborg.com
Trelleborg is a global industrial group whose leading positions are based on advanced polymer technology and in-depth applications know-how. Trelleborg develops high-performance solutions that seal, damp and protect in demanding industrial environments. The Trelleborg Group has annual sales of about SEK 22 billion, with about 15,500 employees in over 40 countries. The Group comprises three business areas: Trelleborg Sealing Solutions, Trelleborg Wheel Systems, and Trelleborg Engineered Systems. In addition, Trelleborg owns 50 percent of TrelleborgVibracoustic, a global leader within antivibration solutions for light and heavy vehicles, with annual sales of SEK 13 billion and about 8 000 employees in over 17 countries. The Trelleborg share has been listed on the Stockholm Stock Exchange since 1964 and is listed on the NASDAQ OMX Nordic List, Large Cap. www.trelleborg.com
This information was brought to you by Cision http://www.cisionwire.com
http://www.cisionwire.com/asher-agency/r/trelleborg-sealing-solutions-invests-in-the-world-s-most-powerful-test-bench-for-hydraulic-rod-seals,c9315805